Biore Charcoal Deep Cleansing Pore Nose Strip 9 Pcs
Biore Charcoal Deep Cleansing Pore Nose Strip helps to remove excess oil, impurities, and dirt that can clog pores and lead to blackheads thanks to its natural charcoal. It deeply cleanses the skin, leaving it fresh and clean in just 10 minutes.
Polyquaternium-37, Silica, Aqua, Glycerin, Polysilicone-13, Peg-12 Dimethicone, Menthol, Charcoal Powder, Styrene, Stearyl Methacrylate Crosspolymer, Tocopherol, Methylparaben.
• Biore Charcoal Deep Cleansing Pore Nose Strip removes blackheads. • Easy to use.
• Biore Charcoal Deep Cleansing Pore Nose Strip helps to draw out impurities and deep oils.
How to use:
1- Remove the strip from the pouch. Twist strip to loosen and separate slits before use (see illustration).
2- After washing your face, thoroughly wet your nose. The strip won’t stick on a dry nose.
3- Dry hands. Peel strip off plastic liner. Apply to nose area, smooth side down, pressing down to ensure good contact with skin.
4- Let dry for about 10- 15 minutes until stiff to the touch.
5- Slowly and carefully peel off starting at the edges, and pulling toward the center. Any residue left on the skin is easily removed with rinsing.
Points of interest:
1- Use Biore Charcoal Deep Cleansing Pore Nose Strip only on the nose.
2- Avoid using on acne or swollen, sunburned, excessively dry skin, or skin prone to spider veins.
3- Avoid using Biore Charcoal Deep Cleansing Pore Nose Strip on skin that is sensitive to bandages or peel-off face masks.
4- Remove the strip as directed promptly after it becomes stiff. If the strip is difficult or painful to remove, wet the strip thoroughly until it slides off easily. Forceful removal of the strip should be avoided and may cause skin abrasions. If this occurs, discontinue use and consult a physician.
Store at room temperature